我說：當初的承諾是，大藍班的正規活動，只要有壽星家庭舉辦，我們一定參加。（除非我們有重大事情）
你說：那是我給的承諾！
（當初確實沒有白底黑字，認了！）
我說：大藍班當初成立的宗旨，是要延續沒有利害關係的友誼，並不是為你而設計的。
你說：現在都變成家長聯誼會。
（So what，變成家長聯誼會又如何？小朋友還是可以相處在一起；大朋友也可以找到舒壓的管道。管他叫什麼名字！）
竟然，你不想參加，就直接明講，不要編個理由，結果理由不成立，就說：我當初就沒有說要去。
當初沒有想參加，就直接說不去，不要編理由。（又是沒有白底黑字，但，這是正常人都有的默契。）
兩個標準，怎麼說都是你說了算，這，我不喜歡。
會長，他媽的會長頭銜，是我爭取來的ㄛ∼能吃啊！誰要啊！不要像政客的嘴臉一樣，道理說不過人家，就在這種無關痛癢的地方進行意識形態的爭辯。歹戲拖棚∼
2016年9月19日 星期一
RE: [juno] timing report is different between tempus and innovus
Hi, Bokong
I think innovus is right. It should be MCP2.
set_multicycle_path 2 -end -setup -from [get_cell inst_master_delay/inst_mstr_dly_control/bypass_reg]
set_multicycle_path 1 -end -hold -from [get_cell inst_master_delay/inst_mstr_dly_control/bypass_reg]
I don’t know why tempus is wrong.
Thanks
Ying
From: Bokong Chen
Sent: Monday, September 19, 2016 5:21 PM
To: Ying Li
Cc: Phoebus Chiou; David Li; bokongchen.58-do@blogger.com
Subject: [juno] timing report is different between tempus and innovus
Hi, Ying,
Report in the Innovus
---
Path 1: MET Setup Check with Pin inst_write_path_tb/inst_wrdq2_macro/inst_tsel_macro/inst_tsel_wr_macro/inst_tsel_wr_strt_wr_n/hic_dnt_out_reg/CP
Endpoint: inst_write_path_tb/inst_wrdq2_macro/inst_tsel_macro/inst_tsel_wr_macro/inst_tsel_wr_strt_wr_n/hic_dnt_out_reg/D (^) checked with leading edge of 'clk_wr_phase_7'
Beginpoint: inst_master_delay/inst_mstr_dly_control/bypass_reg/Q (v) triggered by leading edge of 'clk_phase_0'
Path Groups: {clk_wr_phase_7}
Analysis View: func_ss0p72vm40c_cworst_CCworst_m40c_setup
Other End Arrival Time 0.717
- Setup 0.038
+ Phase Shift 0.000
+ CPPR Adjustment 0.009
+ Cycle Adjustment 0.749
- Uncertainty 0.075
= Required Time 1.362
- Arrival Time 1.323
= Slack Time 0.040
Report in the Tempus
---
Path 1: VIOLATED Setup Check with Pin inst_write_path_tb/inst_wrdq2_macro/inst_tsel_macro/inst_tsel_wr_macro/inst_tsel_wr_strt_wr_n/hic_dnt_out_reg/CP
Endpoint: inst_write_path_tb/inst_wrdq2_macro/inst_tsel_macro/inst_tsel_wr_macro/inst_tsel_wr_strt_wr_n/hic_dnt_out_reg/D (^) checked with leading edge of 'clk_wr_phase_7'
Beginpoint: inst_master_delay/inst_mstr_dly_control/bypass_reg/Q (v) triggered by leading edge of 'clk_phase_0'
Path Groups: {reg2reg}
Other End Arrival Time 0.729
- Setup 0.038
+ Phase Shift 0.000
+ CPPR Adjustment 0.010
- Uncertainty 0.075
= Required Time 0.626
- Arrival Time 1.301
= Slack Time -0.675
Which one is the correct timing report ?
The detail timing reports are as following.
Innovus) /proj/juno/work/bokong/cdn_hs_phy_data_slice/open6/OPENds/a
Tempus) /proj/juno/work/bokong/sta_signoff/phy/reports/cdn_hs_phy_data_slice/WCLcworstm40c_Func_setup/cdn_hs_phy_data_slice.timing.reg2reg.max.ets (Path 1)
Bokong
RE: [juno] timing report is different between tempus and innovus
Bokong,
I am doing n7 eco now, I will look into later.
Thanks
Ying
From: Bokong Chen
Sent: Monday, September 19, 2016 5:21 PM
To: Ying Li
Cc: Phoebus Chiou; David Li; bokongchen.58-do@blogger.com
Subject: [juno] timing report is different between tempus and innovus
Hi, Ying,
Report in the Innovus
---
Path 1: MET Setup Check with Pin inst_write_path_tb/inst_wrdq2_macro/inst_tsel_macro/inst_tsel_wr_macro/inst_tsel_wr_strt_wr_n/hic_dnt_out_reg/CP
Endpoint: inst_write_path_tb/inst_wrdq2_macro/inst_tsel_macro/inst_tsel_wr_macro/inst_tsel_wr_strt_wr_n/hic_dnt_out_reg/D (^) checked with leading edge of 'clk_wr_phase_7'
Beginpoint: inst_master_delay/inst_mstr_dly_control/bypass_reg/Q (v) triggered by leading edge of 'clk_phase_0'
Path Groups: {clk_wr_phase_7}
Analysis View: func_ss0p72vm40c_cworst_CCworst_m40c_setup
Other End Arrival Time 0.717
- Setup 0.038
+ Phase Shift 0.000
+ CPPR Adjustment 0.009
+ Cycle Adjustment 0.749
- Uncertainty 0.075
= Required Time 1.362
- Arrival Time 1.323
= Slack Time 0.040
Report in the Tempus
---
Path 1: VIOLATED Setup Check with Pin inst_write_path_tb/inst_wrdq2_macro/inst_tsel_macro/inst_tsel_wr_macro/inst_tsel_wr_strt_wr_n/hic_dnt_out_reg/CP
Endpoint: inst_write_path_tb/inst_wrdq2_macro/inst_tsel_macro/inst_tsel_wr_macro/inst_tsel_wr_strt_wr_n/hic_dnt_out_reg/D (^) checked with leading edge of 'clk_wr_phase_7'
Beginpoint: inst_master_delay/inst_mstr_dly_control/bypass_reg/Q (v) triggered by leading edge of 'clk_phase_0'
Path Groups: {reg2reg}
Other End Arrival Time 0.729
- Setup 0.038
+ Phase Shift 0.000
+ CPPR Adjustment 0.010
- Uncertainty 0.075
= Required Time 0.626
- Arrival Time 1.301
= Slack Time -0.675
Which one is the correct timing report ?
The detail timing reports are as following.
Innovus) /proj/juno/work/bokong/cdn_hs_phy_data_slice/open6/OPENds/a
Tempus) /proj/juno/work/bokong/sta_signoff/phy/reports/cdn_hs_phy_data_slice/WCLcworstm40c_Func_setup/cdn_hs_phy_data_slice.timing.reg2reg.max.ets (Path 1)
Bokong
[juno] timing report is different between tempus and innovus
Hi, Ying,
Report in the Innovus
---
Path 1: MET Setup Check with Pin inst_write_path_tb/inst_wrdq2_macro/inst_tsel_macro/inst_tsel_wr_macro/inst_tsel_wr_strt_wr_n/hic_dnt_out_reg/CP
Endpoint: inst_write_path_tb/inst_wrdq2_macro/inst_tsel_macro/inst_tsel_wr_macro/inst_tsel_wr_strt_wr_n/hic_dnt_out_reg/D (^) checked with leading edge of 'clk_wr_phase_7'
Beginpoint: inst_master_delay/inst_mstr_dly_control/bypass_reg/Q (v) triggered by leading edge of 'clk_phase_0'
Path Groups: {clk_wr_phase_7}
Analysis View: func_ss0p72vm40c_cworst_CCworst_m40c_setup
Other End Arrival Time 0.717
- Setup 0.038
+ Phase Shift 0.000
+ CPPR Adjustment 0.009
+ Cycle Adjustment 0.749
- Uncertainty 0.075
= Required Time 1.362
- Arrival Time 1.323
= Slack Time 0.040
Report in the Tempus
---
Path 1: VIOLATED Setup Check with Pin inst_write_path_tb/inst_wrdq2_macro/inst_tsel_macro/inst_tsel_wr_macro/inst_tsel_wr_strt_wr_n/hic_dnt_out_reg/CP
Endpoint: inst_write_path_tb/inst_wrdq2_macro/inst_tsel_macro/inst_tsel_wr_macro/inst_tsel_wr_strt_wr_n/hic_dnt_out_reg/D (^) checked with leading edge of 'clk_wr_phase_7'
Beginpoint: inst_master_delay/inst_mstr_dly_control/bypass_reg/Q (v) triggered by leading edge of 'clk_phase_0'
Path Groups: {reg2reg}
Other End Arrival Time 0.729
- Setup 0.038
+ Phase Shift 0.000
+ CPPR Adjustment 0.010
- Uncertainty 0.075
= Required Time 0.626
- Arrival Time 1.301
= Slack Time -0.675
Which one is the correct timing report ?
The detail timing reports are as following.
Innovus) /proj/juno/work/bokong/cdn_hs_phy_data_slice/open6/OPENds/a
Tempus) /proj/juno/work/bokong/sta_signoff/phy/reports/cdn_hs_phy_data_slice/WCLcworstm40c_Func_setup/cdn_hs_phy_data_slice.timing.reg2reg.max.ets (Path 1)
Bokong
訂閱：
文章 (Atom)
